FS: LS1 longblock and parts

[Blackhawk1998]

longblock mostly stock with a Thunder Racing Custom Camshaft TR 224-114 224/224 .563/.563 114 LSA, stock TB, new bearings set "gm",harden pushrods, lifters,springs,valve covers,MAF, NO oil pan, NO Fuel Rails, NO Pulleys cant find them, NO Alternator, NO Sensors, No Water Pump, NO Headers only has about 23,000 miles on it. 1100.00 or obo

1,800 for everything

QTP new = 135.00 obo
Flowtech Exhuast Cut-out new = 35.00 obo
F.A.S.T. 78mm Throttle Body = 400.00 obo















Comp Cam Rocker Arms full set 300.00 obo



also

comp cam 54-000-11
3724/3725R HR112.0
INT EXH
ADV DUR: 277 279
DUR @ .050: 228 230 lobe sep:112.0
VALVE LIFT: .588 .591
still in box 315.00 obo


if you want everything i can do a cheaper package price

[carbedlsx_Z28]

Is that oil pump pickup tube an fbody one? If so, would u be willing to part and how much if so?

Also, would you happen to have a set of motor mounts that mount to the block?


thx..

[jay]

2500? good lawd.

[birdofprey99]

Bit steep there buddy since you can find a WHOLE ls1 sans wiring harness for that much.

[Blackhawk1998]

updated....

[birdofprey99]

Ok now that has me hardcore interested. I could use a long block for a build instead of doing my worn out one.

[Blackhawk1998]

Ok now that has me hardcore interested. I could use a long block for a build instead of doing my worn out one.

if u want more pics or want to come see it let me know

[PontiacFan]

What size is the QTP & the FlowTech cut-out?
Got the switch with it yet also? Complete?

[Blackhawk1998]

What size is the QTP & the FlowTech cut-out?
Got the switch with it yet also? Complete?

3" outside yeah complete never used

[Blackhawk1998]

tttttt

[slownova]

do you got a intake? any of the covers? why do you have new bearings? did one spin?

[Blackhawk1998]

I have the stock intake.. covers? no i didnt spin one just was going to change for a rotating assemblie.

[Blackhawk1998]

updated

[carbedlsx_Z28]

Is that oil pump pickup tube an fbody one? If so, would u be willing to part and how much if so?
Also, would you happen to have a set of motor mounts that mount to the block?


thx..

[Blackhawk1998]

Is that oil pump pickup tube an fbody one? If so, would u be willing to part and how much if so?
Also, would you happen to have a set of motor mounts that mount to the block?


thx..

yeah it is oil pick up but i dont really want to part with it from the motor. i dont have the motor mount blocks.